text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

请选择数量

CAS RN: 16940-66-2 | 產品號碼: S0480

Sodium Borohydride


纯度/分析方法: >95.0%(T)
別名
  • Sodium Tetrahydroborate
  • Sodium Tetrahydridoborate
文件:
25G
NT$1,160
≥80  ≥100  下單後約3-4週內可以出貨
100G
NT$2,200
≥40  ≥100  下單後約3-4週內可以出貨
500G
NT$5,680
3   ≥100  下單後約2週內可以出貨

* 以上價格已含運費關稅等但一些需要海運以及乾冰運輸的產品除外,詳情請與 當地經銷商 洽詢。
* TCI會時常優化儲存條件,儲存溫度請以在線目錄為準,敬請留意。


產品號碼 S0480
純度/分析方法 >95.0%(T)
分子式 / 分子量 NaBH__4 = 37.83 
外觀與形狀(20°C) Solid
儲存條件 Room Temperature (Recommended in a cool and dark place, <15°C)
儲存在惰性氣體下 Store under inert gas
應避免的情況 Moisture Sensitive
CAS RN 16940-66-2
Reaxys-RN 11343078
PubChem Substance ID 87575954
Merck Index(14) 8592
MDL編號

MFCD00003518

產品規格
Appearance White to Almost white powder to crystal
Purity(Sodium hypochlorite Method) min. 95.0 %
性質
水溶性 Soluble
溶解性(不溶於) Ether
GHS
圖形表示 Pictogram Pictogram Pictogram Pictogram
信號詞 Danger
危險性說明 H301 + H311 : Toxic if swallowed or in contact with skin.
H314 : Causes severe skin burns and eye damage.
H360 : May damage fertility or the unborn child.
H260 : In contact with water releases flammable gases which may ignite spontaneously.
防範說明 P501 : Dispose of contents/ container to an approved waste disposal plant.
P223 : Do not allow contact with water.
P260 : Do not breathe dusts or mists.
P270 : Do not eat, drink or smoke when using this product.
P202 : Do not handle until all safety precautions have been read and understood.
P231 + P232 : Handle under inert gas. Protect from moisture.
P201 : Obtain special instructions before use.
P264 : Wash skin thoroughly after handling.
P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection.
P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
P335 + P334 : Brush off loose particles from skin. Immerse in cool water/ wrap in wet bandages.
P308 + P313 : IF exposed or concerned: Get medical advice/ attention.
P361 + P364 : Take off immediately all contaminated clothing and wash it before reuse.
P303 + P361 + P353 : IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P301 + P330 + P331 : IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P301 + P310 + P330 : IF SWALLOWED: Immediately call a POISON CENTER/doctor. Rinse mouth.
P304 + P340 + P310 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.
P305 + P351 + P338 + P310 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
P402 + P404 : Store in a dry place. Store in a closed container.
P405 : Store locked up.
相關法規
RTECS # ED3325000
運輸資料
UN編號 UN1426
類別 4.3
包裝類別 I
HS編碼* 2850.00-000
*此H.S.編碼用於日本出口報關, 不適用於您所在國家或地區的進口申報
Application
TCI Practical Example: Reduction of Ketone Using Sodium Borohydride

TCI Practical Example: Reduction of Ketone Using Sodium Borohydride

Used Chemicals

Procedure

Sodium borohydride (250 mg, 6.70 mmol) was separately added to a solution of 4',5'-dimethoxy-2'-nitroacetophenone (1.50 g, 6.70 mmol) in THF (12 mL) and methanol (3 mL) at 0 °C. Then the mixture was allowed to warm to room temperature and stirred for 1.5 hours. The solution was diluted with dichloromethane (15 mL) and washed with water (15 mL x 3) and brine (15 mL), dried over sodium sulfate and filtered. The solvent was removed under reduced pressure. The residue was diluted with THF (6 mL) and the mixture was stirred at 37 °C. Hexane (10 mL) was added to the solution and the mixture was stirred at 0 °C and filtered to give 1 (1.16 g、77%) as a yellow solid.

Experimenter’s Comments

The reaction mixture was monitored by TLC (hexane:ethyl acetate = 1:1, Rf = 0.47) and UPLC.
To avoid moisture absorption of sodium borohydride, weighing was done quickly.

Analytical Data

Compound 1

1H NMR (400 MHz, CDCl3); δ 7.57 (s, 1H), 7.31 (s, 1H), 5.58 (q, J = 5.4 Hz, 1H), 4.01 (s, 3H), 3.95 (s, 3H), 1.56 (d, J = 5.4 Hz, 3H).

Lead Reference


Application
Reducing Agent

References


Application
Inorganic Hydride Used as A Hydrogen Source of Fuel Cell

References


Application
Nickel boride mediated cleavage of 1,3-dithiolanes

Typical procedure: 2,2-Diphenyl-1,3-dithiolane (0.2 g) dissolved in methanol (8 mL) and THF (2 mL). NiCl2·6H2O (0.92 g) is added, followed by NaBH4 (0.44 g). The reaction mixture is stirred vigorously at room temperature for 20 min. The reaction mixture was filtered through a celite pad and washed with methanol (2 x 10 mL). Water is added to the filtrate, which is extracted with ethyl acetate (3 x 10 mL). The combined extract is dried over MgSO4, and concentrated under reduced pressure to give diphenylmethane (0.12g, 92 %).

References


考研文獻


文章/手冊

產品文件 (部分產品的分析圖譜無法提供,敬請諒解。)
SDS
請選擇語言。

請求的SDS不可用。

如需更多幫助,請聯繫我們

產品規格
檢驗報告(CoA)及其他文檔
請輸入批號 輸入的批號不正確

所搜尋批號的產品已停產,無相關文件。

示例 CoA
可下載CoA示例。注:該示例可能非最新批次的CoA。

目前沒有該產品的 CoA 示例。

分析圖譜
請輸入批號 輸入的批號不正確

很抱歉,您搜索的分析圖譜無法提供。

所搜尋批號的產品已停產,無相關文件。

其他文件

會話狀態
當前會話將在10分鐘後超時,並返回主頁。請點擊按鈕繼續瀏覽。分鐘後超時,並返回主頁。請點擊按鈕繼續瀏覽。

您的會話已超時,將返回至主頁。