text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

Please select the quantity

CAS RN: | Product Number: R0238

rSRL-LecBeads [for GlcNAcβ(1-2)Man, Galβ(1-3)GalNAc]


Purity:
Synonyms:
  • rSRL-Agarose
  • Recombinant Sclerotium rolfsii lectin (= rSRL)-Agarose
Product Documents:
1VIAL
$409.00
5   1  

* Please contact our distributors or TCI to order our products. The above prices do not include freight cost, customs, and other charges to the destination.
* The storage conditions are subject to change without notice.


Supplemental Product Information:

Product information
Product code : R0238
Product name : rSRL-LecBeads [for GlcNAcβ(1-2)Man, Galβ(1-3)GalNAc]
Preparation : Recombinant SRL is covalently coupled with agarose gel
Quantity : 1 ml gel/2 ml (1:1, v/v slurry) suspended in PBS, pH7.5
Protein concentration : about 15 mg/ml gel
Binding capacity : >7.5 mg of glycoprotein (agalacto human Transferrin) /ml gel
Preservative : 0.02% [w/v] Sodium azide
Stabilizer : None

Description
The rSRL is an Escherichia coli recombinant of carbohydrate-binding protein (Lectin) derived from Sclerotium rolfsii. This lectin preferably binds to [GlcNAcβ(1-2)Man, Galβ(1-3)GalNAc] glycan epitopes by its two distinct carbohydrate-binding sites.
The LecBeads is a lectin-immobilized agarose which is capable of capturing glycoproteins via binding to its specific epitope(s), and it is prepared by a covalent coupling method between lectin and agarose.
The Lectin-catch method using LecBeads (as shown in Application tab) is available for selective separation of glycoconjugates (glycoproteins, glycolipids, and so on). This rSRL-LecBeads (1 ml gel) shows a binding capacity of about 7.5 mg or more agalacto human Transferrin [agalacto hTF] through its binding to a terminal [GlcNAcβ(1-2)Man] glycan epitope on agalacto hTF.

Storage
Store at 2-10°C. (Avoid freezing).

Related Products
R0228 Recombinant Sclerotium rolfsii lectin (= rSRL) expressed in Escherichia coli
R0233 rSRL-Biotin [for GlcNAcβ(1-2)Man, Galβ(1-3)GalNAc]
R0235 rPSL1a-LecBeads [for Siaα(2-6)Gal]
R0236 rLSL-N-LecBeads [for Galβ(1-4)GlcNAc, poly LacNAc
R0237 rMOA-LecBeads [for Galα(1-3)Gal]
R0239 rGRFT-LecBeads [for Manα(1-2)Man]
A3331 AOL-LecBeads [for Fucα(1-6)/α(1-4)/α(1-3)/α(1-2)]

Product Number R0238
Physical State (20 deg.C) Liquid
Storage Temperature Refrigerated (0-10°C)
Condition to Avoid Heat Sensitive
Specifications
Appearance White to Almost white clear liquid to cloudy liquid
Concentration(Lowry method) min. 9.0 mg/mL gel
Binding capacity to pass test(min. 5 mg/mL gel, Agalacto-human transferrin)
Properties (reference)
GHS
Related Laws:
Transport Information:
H.S.code* 3504.00-000
*This code is applied to the products when TCI exports from Japan and not for import in your country.
Application
The lectin-catch procedure

< Preparation >
Buffers
Binding buffer : PBS pH7.5
Elution buffer : PBS pH7.5 containing 200 mM D-GlcNAc [Product code: A0092] and 0.1% triton-X100 [Product code: P1775]
(Herein, an example of capturing agalacto-type glycoprotein is shown.)

< Method of the lectin-catch > ※Centrifuge method

Equilibration

  • Prepare the LecBeads in a new tube.
  • Add the Binding buffer into the tube to equilibrate the gel.
  • Centrifuge the tube at 800 ×g for 3 min and discard the supernatant. (If necessary, repeat equilibration with the Binding buffer >10-fold volume of the LecBeads appropriately.)

Binding

  • Concentrate or dilute the glycoprotein sample to moderate concentration (e.g., 1 mg/ml) with the Binding buffer [Input fraction], and apply the prepared sample to the tube in which the LecBeads was preliminary equilibrated.
  • Agitate the tube at 4°C (※Generally, a dissociation constants (Kd value) of lectins are tend to be decreased at lower temperature) for a few hours (or overnight).
  • Centrifuge the tube at 800 ×g for 3 min and remove the supernatant [Through fraction].
  • Wash the LecBeads by 5 (to 10)-fold of the slurry volume with the Binding buffer several times.


Elution

  • Elute the glycoprotein from the LecBeads by agitation with an appropriate volume of the Elution buffer (e.g. same volume of the LecBeads).
  • Agitate the reaction tube at 4°C or R.T. for a few hours (or overnight).
  • Centrifuge the tube at 800 ×g for 3 min and remove the supernatant [Elution fraction].
  • Check the resulting fractions ([Input fraction] [Through fraction] [Elution fraction]) by protein assay and SDS-PAGE. (In some cases, the repetitive elution step with a small volume of the Elution buffer might improve the elution effect. If necessary, repeat elution steps.)
  • The competitive oligosaccharide included in the obtained elution fractions can be removed by ultrafiltration or dialysis using a sufficient amount of buffer.

 

References


Product Documents (Note: Some products will not have analytical charts available.)
Safety Data Sheet (SDS)
Please select Language.

The requested SDS is not available.

Please Contact Us for more information.

Specifications
C of A & Other Certificates
Please enter Lot Number Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.

The product with the lot number searched for has been discontinued and no related documentation is available.

Sample C of A
This is a sample C of A and may not represent a recently manufactured lot of the product.

A sample C of A for this product is not available at this time.

Analytical Charts
Please enter Lot Number Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.

The requested analytical chart is not available. Sorry for the inconvenience.

The product with the lot number searched for has been discontinued and no related documentation is available.

Other Documents

Session Status
Your session will timeout in 10 minutes. You will be redirected to the HOME page after session timeout. Please click the button to continue session from the same page. minute. You will be redirected to the HOME page after session timeout. Please click the button to continue session from the same page.

Your session has timed out. You will be redirected to the HOME page.