text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

Please select the quantity

CAS RN: 25952-53-8 | Product Number: D1601

1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide Hydrochloride [Coupling Agent for Peptides Synthesis]


Purity: >98.0%(T)
Synonyms:
  • 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide Hydrochloride
  • EDC·HCl
  • EDAC·HCl
  • EDCI·HCl
Product Documents:
5G
$54.00
≥60  ≥100 
25G
$156.00
≥100  ≥100 
100G
$448.00
≥40  ≥40 
250G
$898.00
≥40  ≥40 

* Please contact our distributors or TCI to order our products. The above prices do not include freight cost, customs, and other charges to the destination.
* The storage conditions are subject to change without notice.


Product Number D1601
Purity / Analysis Method >98.0%(T)
Molecular Formula / Molecular Weight C__8H__1__7N__3·HCl = 191.70 
Physical State (20 deg.C) Solid
Storage Temperature Refrigerated (0-10°C)
Store Under Inert Gas Store under inert gas
Condition to Avoid Moisture Sensitive,Heat Sensitive
CAS RN 25952-53-8
Reaxys Registry Number 5764110
PubChem Substance ID 87568083
SDBS (AIST Spectral DB) 21309
MDL Number

MFCD00012503

Specifications
Appearance White powder to crystal
Purity(with Total Nitrogen) min. 97.0 %
Purity(Argentometric Titration) min. 98.0 %
NMR confirm to structure
Properties (reference)
Melting Point 116 °C
Degree of solubility in water 1,000 g/l   20 °C
Solubility (soluble in) Dimethylformamide, Alcohol
GHS
Pictogram Pictogram Pictogram Pictogram
Signal Word Danger
Hazard Statements H311 : Toxic in contact with skin.
H302 : Harmful if swallowed.
H315 : Causes skin irritation.
H319 : Causes serious eye irritation.
H373 : May cause damage to organs through prolonged or repeated exposure.
H317 : May cause an allergic skin reaction.
H410 : Very toxic to aquatic life with long lasting effects.
Precautionary Statements P501 : Dispose of contents/ container to an approved waste disposal plant.
P273 : Avoid release to the environment.
P272 : Contaminated work clothing should not be allowed out of the workplace.
P260 : Do not breathe dust/ fume/ gas/ mist/ vapors/ spray.
P270 : Do not eat, drink or smoke when using this product.
P264 : Wash skin thoroughly after handling.
P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection.
P391 : Collect spillage.
P314 : Get medical advice/ attention if you feel unwell.
P337 + P313 : If eye irritation persists: Get medical advice/ attention.
P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P361 + P364 : Take off immediately all contaminated clothing and wash it before reuse.
P333 + P313 : If skin irritation or rash occurs: Get medical advice/ attention.
P301 + P312 + P330 : IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
P302 + P352 + P312 : IF ON SKIN: Wash with plenty of water.Call a POISON CENTER/doctor if you feel unwell.
P405 : Store locked up.
Related Laws:
RTECS# FF2200000
Transport Information:
UN Number UN2811
Class 6.1
Packing Group III
H.S.code* 2925.29-000
*This code is applied to the products when TCI exports from Japan and not for import in your country.
Application
TCI Practical Example: Condensation

Used Chemicals

Procedure

1-(2-methoxyphenyl)piperazine (500 mg, 2.60 mmol) was dissolved in DMF (15 mL). To this solution was added N-benzyloxycarbonyl-L-phenylalanine (770 mg, 2.60 mmol) and HOBt·H2O (414 mg, 2.71 mmol). The reaction mixture was cooled to 0 °C, then EDC·HCl (515 mg, 2.71 mmol) was added. Reaction was allowed to warm to room temperature, then stirred for 20 h at room temperature. Complete of the reaction was confirmed by TLC. Reaction was quenched by adding H2O (20 mL). Reaction mixture was extracted by EtOAc (30 mL). Organic phase was washed with H2O (20 mL, twice) and brine (20 mL), dried over Na2SO4, concentrated under reduced pressure to afford the crude product (1.2 g) as pale yellow oil. The crude product was purified by column chromatography on silica gel (hexane : ethyl acetate = 40 : 60) to afford the product 1 as a white powder (1.10 g, 2.32 mmol, 90%).

Experimenter's Comments

The reaction mixture was monitored by TLC (hexane / ethyl acetate = 4 : 6, Rf = 0.40)

Analytical Data(Compound 1)

1H NMR (400 MHz, CDCl3); δ 7.39-7.16 (m, 10H), 6.99 (m, 1H), 6.91-6.84 (m, 2H), 6.78 (m, 1H), 5.73 (d, J = 8,2 Hz, 1H), 5.12-5.01 (m, 2H), 4.91 (dd, J= 7.7, 7.3 Hz, 1H), 3.82 (s, 3H), 3.71-3.63 (m, 2H), 3.51 (m, 1H), 3.31 (m, 1H), 3.07-2.78 (m, 5H), 2.51 (m, 1H).


Application
Formation of Peptide Bonds Using EDC·HCl /HOBt

Typical Procedure: To a solution of Boc-ΔTyr(Cl2Bzl)-OH (307 mg, 0.7 mmol), glycinamide hydrochloride (77.4 mg, 0.7 mmol) and Et3N (0.1 mL, 0.7 mmol) in DMF (7 mL) is added EDC·HCl (148 mg. 0.77 mmol) and HOBt (129 mg, 0.84 mmol) at -10°C. The reaction mixture is stirred for 2 h at 0°C. and overnight at room temperature. After the solution is evaporated, the residual is dissolved in EtOAc. The solution is washed with 4% NaHCO3, 10% citric acid and water. The solution is dried and evaporated. The purification is carried out by silica gel column chromatography to give Boc-ΔTyr(Cl2Bzl)-Gly-NH2 (317 mg, 85% yield).
(Δ means dehydro-form.)

References

  • Dehydro‐enkephalins

  • Application
    Water-soluble Condensation Reagent

    Typical Procedure: To a 50 mL round bottom flask equipped with a magnetic stir bar and septum is added 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride 2.54 g (13.3 mmol), 4-dimethylaminopyridine 1.62 g (13.3 mmol), carboxylic acid 1.02 g (2.46 mmol), alcohol 0.96 g (3.98 mmol) and CHCl3 (15 mL), and the reaction mixture is stirred at room temperature for 2.5 days. Acetic acid (0.5 mL) is added and the reaction mixture is stirred for 10 min to convert excess alcohol to a more easily separable acetate. The mixture is washed with saturated aqueous NH4Cl solution, diluted with Et2O, and the layers are dried, filtered and concentrated under reduced pressure. The crude material is chromatographed by silica gel column chromatography (hexane:ethyl acetate = 9:1) to give the desired product 1.25 g (1.96 mmol, 80%).

    References

Product Documents (Note: Some products will not have analytical charts available.)
Safety Data Sheet (SDS)
Please select Language.

The requested SDS is not available.

Please Contact Us for more information.

Specifications
C of A & Other Certificates
Please enter Lot Number Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.

The product with the lot number searched for has been discontinued and no related documentation is available.

Sample C of A
This is a sample C of A and may not represent a recently manufactured lot of the product.

A sample C of A for this product is not available at this time.

Analytical Charts
Please enter Lot Number Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.

The requested analytical chart is not available. Sorry for the inconvenience.

The product with the lot number searched for has been discontinued and no related documentation is available.

Other Documents

Session Status
Your session will timeout in 10 minutes. You will be redirected to the HOME page after session timeout. Please click the button to continue session from the same page. minute. You will be redirected to the HOME page after session timeout. Please click the button to continue session from the same page.

Your session has timed out. You will be redirected to the HOME page.