Maximum quantity allowed is 999
CAS RN: 7677-24-9 | Product Number: T0990
Trimethylsilyl Cyanide
Purity: >96.0%(GC)
- Cyanotrimethylsilane
- TMSCN
* Please contact our distributors or
TCI
to order our products. The above prices do not include freight cost, customs, and other charges to the destination.
* The storage conditions are subject to change without notice.
Product Number | T0990 |
Purity / Analysis Method | >96.0%(GC) |
Molecular Formula / Molecular Weight | C__4H__9NSi = 99.21 |
Physical State (20 deg.C) | Liquid |
Storage Temperature | Refrigerated (0-10°C) |
Store Under Inert Gas | Store under inert gas |
Condition to Avoid | Moisture Sensitive,Heat Sensitive |
CAS RN | 7677-24-9 |
Reaxys Registry Number | 1737612 |
PubChem Substance ID | 87576800 |
SDBS (AIST Spectral DB) | 6005 |
MDL Number | MFCD00001765 |
Appearance | Colorless to Light orange to Yellow clear liquid |
Purity(GC) | min. 96.0 % |
NMR | confirm to structure |
Melting Point | 10 °C |
Boiling Point | 117 °C |
Flash point | 1 °C |
Specific Gravity (20/20) | 0.80 |
Refractive Index | 1.39 |
Pictogram | |
Signal Word | Danger |
Hazard Statements | H300 + H310 + H330 : Fatal if swallowed, in contact with skin or if inhaled. H315 : Causes skin irritation. H319 : Causes serious eye irritation. H225 : Highly flammable liquid and vapor. |
Precautionary Statements | P501 : Dispose of contents/ container to an approved waste disposal plant. P260 : Do not breathe dust/ fume/ gas/ mist/ vapors/ spray. P270 : Do not eat, drink or smoke when using this product. P262 : Do not get in eyes, on skin, or on clothing. P240 : Ground/bond container and receiving equipment. P210 : Keep away from heat/sparks/open flames/hot surfaces. No smoking. P233 : Keep container tightly closed. P243 : Take precautionary measures against static discharge. P241 : Use explosion-proof electrical/ ventilating/ lighting/ equipment. P242 : Use only non-sparking tools. P271 : Use only outdoors or in a well-ventilated area. P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ eye protection/ face protection. P284 : Wear respiratory protection. P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish. P337 + P313 : If eye irritation persists: Get medical advice/ attention. P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P361 + P364 : Take off immediately all contaminated clothing and wash it before reuse. P303 + P361 + P353 : IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P332 + P313 : If skin irritation occurs: Get medical advice/ attention. P301 + P310 + P330 : IF SWALLOWED: Immediately call a POISON CENTER/doctor. Rinse mouth. P304 + P340 + P310 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. P403 + P233 : Store in a well-ventilated place. Keep container tightly closed. P403 + P235 : Store in a well-ventilated place. Keep cool. P405 : Store locked up. |
UN Number | UN3383 |
Class | 6.1 / 3 |
Packing Group | I |
Air Transportation | Forbidden for Air Transport |
H.S.code* | 2931.90-000 |
-
Used Chemicals
-
Procedure
-
Methylamine (40% in methanol, ca. 9.8 mol/L, 1.0 mL, 10 mmol, 2.0 eq.) was added to a solution of p-tolualdehyde (601 mg, 5.0 mmol) in methanol (12 mL) at room temperature and the mixture was stirred for 1 hour. Then TMSCN (744 mg, 7.5 mmol, 1.5 eq.) was added to the mixture and stirred at room temperature for overnight. The solvent was removed under reduced pressure. The residue was diluted with ethyl acetate (15 mL) and water (15 mL) and separated. The water layer was extracted with ethyl acetate (15 mL x 2) and the organic layer was washed with brine (15 mL), dried over sodium sulfate and filtered. The solvent was removed under reduced pressure and the residue was purified by column chromatography (on silica gel, ethyl acetate:hexane = 1:4) to give 1 as a pale yellow liquid (605 mg, 76% yield).
-
Experimenter’s Comments
-
The reaction mixture was monitored by UPLC.
This experiment was performed in a fume hood due to the possibility of generating hydrogen cyanide.
-
Analytical Data
-
Compound 1
1H NMR (400 MHz, CDCl3); δ 7.40 (d, J = 8.0 Hz, 2H), 7.21 (d, J = 8.0 Hz, 2H), 4.72 (2, 1H), 2.57 (s, 3H), 2.37 (s, 3H), 1.47 (brs, 1H).
-
Lead Reference
-
- Racemase Activity of B. cepacia Lipase Leads to Dual-Function Asymmetric Dynamic Kinetic Resolution of α-Aminonitriles
Articles/Brochures
Safety Data Sheet (SDS)
The requested SDS is not available.
Please Contact Us for more information.
Specifications
C of A & Other Certificates
Sample C of A
A sample C of A for this product is not available at this time.
Analytical Charts
The requested analytical chart is not available. Sorry for the inconvenience.