Maximum quantity allowed is 999
CAS RN: 7440-23-5 | Product Number: D5792
SD Super Fine™ (Sodium 25wt% dispersion in mineral oil)
Purity:
- Sodium Dispersion (Sodium 25wt% dispersion in mineral oil)
Size | Unit Price | Same Day | 2-3 Business Days |
---|---|---|---|
5G |
$29.00
|
12 | Contact Us |
25G |
$59.00
|
Contact Us | Contact Us |
100G |
$173.00
|
2 | Contact Us |
* Please contact our distributors or
TCI
to order our products. The above prices do not include freight cost, customs, and other charges to the destination.
* The storage conditions are subject to change without notice.
Supplemental Product Information:
The 100G size ships as one box with 4 x 25G bottles.
This product is designed to be stored in a freezer, as it will cause sedimentation by long-term storage.
Please shake the bottle vigorously up and down until a sediment of fine particles redisperses homogeneously before use.
If agglomerate is still remaining even after vigorous shaking, please dispose appropriately.
We recommend to consume this product as soon as possible after purchasing.
This product was commercialized with the cooperation and help from Kobelco Eco-Solutions Co., Ltd.
SD Super Fine™ is a trademark of Kobelco Eco-Solutions Co.,Ltd.
Product Number | D5792 |
Molecular Formula / Molecular Weight | Na = 22.99 |
Physical State (20 deg.C) | Liquid |
Storage Temperature | Frozen (-20°C) |
Store Under Inert Gas | Store under inert gas |
Condition to Avoid | Moisture Sensitive,Heat Sensitive |
CAS RN | 7440-23-5 |
PubChem Substance ID | 468591564 |
Merck Index (14) | 8570 |
MDL Number | MFCD00085307 |
Appearance | Light gray to Brown to Black cloudy liquid |
Concentration(Neutralization titration) | 25.0 to 27.0 % |
Specific Gravity (20/20) | 0.90 |
Pictogram | |
Signal Word | Danger |
Hazard Statements | H314 : Causes severe skin burns and eye damage. H260 : In contact with water releases flammable gases which may ignite spontaneously. |
Precautionary Statements | P501 : Dispose of contents/ container to an approved waste disposal plant. P223 : Do not allow contact with water. P231 + P232 : Handle under inert gas. Protect from moisture. P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection. P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish. P335 + P334 : Brush off loose particles from skin. Immerse in cool water/ wrap in wet bandages. P303 + P361 + P353 : IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P301 + P330 + P331 : IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P363 : Wash contaminated clothing before reuse. P304 + P340 + P310 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. P305 + P351 + P338 + P310 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. P402 + P404 : Store in a dry place. Store in a closed container. P405 : Store locked up. |
RTECS# | VY0686000 |
UN Number | UN1391 |
Class | 4.3 |
Packing Group | I |
H.S.code* | 2805.11-000 |
-
Used Chemicals
-
Procedure
-
To reaction vessel under nitrogen atmosphere, 1,3-dimethyl-2-imidazolidinone (5.0 mL), tetrahydrofuran (0.42 mL) were added successively and cooled in ice bath. And SD Super Fine™ (Sodium 25wt% dispersion in mineral oil, 0.70 g) weighted in a syringe was added to the mixture. Decylbenzene (0.42 g, 1.9 mmol) and tert-butyl alcohol (0.57 g, 7.7 mmol) were added at the same temperature. After 30 minutes, confirmed consumption of raw material completely by TLC, the reaction mixture was added to ice water. The aqueous layer was extracted with hexane and the organic layer was washed with brine and dried over magnesium sulfate. After filtration, the filtrate was concentrated. The obtained crude product was purified by silica gel column chromatography (hexane) and 1-decyl-1,4-cyclohexadiene (388 mg, yield 92% (NMR), containing 13% 1-decylcyclohex-1-ene) as a colorless oil.
-
Experimenter’s Comments
-
The reaction mixture was monitored by TLC (hexane, Rf = 0.9).
Since this reaction does not require liquid ammonia, it is more convenient to perform than the conventional Birch reduction.
-
Lead Reference
-
- Birch Reduction of Arenes Using Sodium Dispersion and DMI under Mild Conditions
-
Other Reference
-
- A Practical and Chemoselective Ammonia-Free Birch Reduction
References
- Organosodium Compounds for Catalytic Cross-coupling
Articles/Brochures
Safety Data Sheet (SDS)
The requested SDS is not available.
Please Contact Us for more information.
Specifications
C of A & Other Certificates
Sample C of A
A sample C of A for this product is not available at this time.
Analytical Charts
The requested analytical chart is not available. Sorry for the inconvenience.