Methylmagnesium Bromide (12% in Tetrahydrofuran, ca. 1mol/L)

×

×

Pureté:

Synonymes

Documents de produit:

SDS | Spécifications | CoA et autres Certificats | Graphiques analytiques

Informations générales | Spécifications et Propriétés | Sécurité et Réglementaire | Applications

Informations supplémentaires sur le produit

Taille	Prix ​​unitaire	Belgique	Japon *	Quantité
250G	83,00 €	3	≥100

*Le délai de livraison pour des produits disponibles en stock en Belgique est 1 à 2 jours
*Le délai de livraison pour des produits disponibles en stock en Japon est 1 à 2 semaines (sauf des produits réglementés et des envois avec de la glace carbonique)

Ajouté à votre panier d'achat

Ajouter au panier

Devis en Vrac

250g bottle of this product is attached with a DualSeal (Septum-type Bottle Cap).
For details, please refer to the page "DualSeal (Septum-type Bottle Cap)".

Grignard reagents are organometallic compounds discovered by a French chemist, Victor Grignard in 1900. These compounds can be obtained as a formula “RMgX” by the reaction of halogenated hydrocarbons with magnesium metal in anhydrous solvents such as diethyl ether,¹⁾ and have been widely used in organic synthesis.

Grignard reagents are usually used as solutions, and they are typically grayish white ~ light brown clear solutions. They generally exist in an equilibrium between alkyl magnesium halides (RMgX) and dialkyl magnesium (R₂Mg), which form equilibrium mixtures with complicated compositions (called “Schlenk equilibrium”).²⁾ Furthermore, some of these species may cause precipitation due to their lower solubility. However, there is no problem in actual use.

In the case of precipitation being formed:
Please use it after gently shaking the bottle to fully disperse the suspension (If the amount of precipitation is very small, you can use the top clear layer of the suspension). Especially in cold conditions such as in winter, a large amount of precipitate may frequently form. In this case, please use it after crushing the solid with a dried glass stick. Alternatively, you can also use it the following. The bottle is put into a plastic bag and soaking in a water bath with warming at 40 degree C to dissolve the solid. Please be careful of volatilization of the organic solvent when the bottle is unsealing.

[References]
1) Kagaku Daijiten (Encyclopaedia Chimica), Kyoritsu Shuppan, Tokyo, 1963, Vol. 3, p. 123.
2) Yuki Kinzoku no Kagaku to Oyo, ed. by Kinki Kagaku Kogyokai Yuki Kinzoku Bukai, Asakura Publishing, Tokyo, 1962, p. 160.

[Disposal] After dilution with twice the volume of toluene, ethyl acetate is added dropwise into the Grignard solution under ice cooling, then quenched by 10% ammonium chloride solution. The resulting organic and aqueous layers after a separation procedure are disposed. The aqueous layer should be neutralized before disposal.The above is only one example of inactivation and following the disposal procedures in our laboratory. You should take sufficient safety measures for proper disposal, observing the amount and condition of waste materials. In addition, you also need to comply with your local government regulations.