Maximum quantity allowed is 999
请选择数量
CAS RN: 81290-20-2 | 產品號碼: T1570
(Trifluoromethyl)trimethylsilane [Trifluoromethylating Reagent]
×
![]()
×
![(Trifluoromethyl)trimethylsilane [Trifluoromethylating Reagent]](/_ui/responsive/theme-tci/images/missing_product_zoom.jpg "(Trifluoromethyl)trimethylsilane [Trifluoromethylating Reagent]")
* 以上價格已含運費關稅等但一些需要海運以及乾冰運輸的產品除外,詳情請與
當地經銷商
洽詢。
* TCI會時常優化儲存條件,儲存溫度請以在線目錄為準，敬請留意。
| 產品號碼 | T1570 |
| 純度/分析方法 | >97.0%(GC) |
| 分子式 / 分子量 | C__4H__9F__3Si = 142.20 |
| 外觀與形狀（20°C） | Liquid |
| 儲存條件 | Room Temperature (Recommended in a cool and dark place, <15°C) |
| 儲存在惰性氣體下 | Store under inert gas |
| 應避免的情況 | Moisture Sensitive |
| CAS RN | 81290-20-2 |
| Reaxys-RN | 4241868 |
| PubChem Substance ID | 87577328 |
| SDBS (AIST Spectral DB) | 19694 |
| Merck Index(14) | 9683 |
| MDL編號 | MFCD00145454 |
產品規格
| Appearance | Colorless to Light yellow clear liquid |
| Purity(GC) | min. 97.0 % |
性質
| 沸點 | 55 °C |
| flp | -32 °C |
| 比重 | 0.96 |
| 折射率 | 1.33 |
GHS
| 圖形表示 |
|
| 信號詞 | Danger |
| 危險性說明 | H225 : Highly flammable liquid and vapor. |
| 防範說明 | P501 : Dispose of contents/ container to an approved waste disposal plant. P240 : Ground/bond container and receiving equipment. P210 : Keep away from heat/sparks/open flames/hot surfaces. No smoking. P233 : Keep container tightly closed. P243 : Take precautionary measures against static discharge. P241 : Use explosion-proof electrical/ ventilating/ lighting/ equipment. P242 : Use only non-sparking tools. P280 : Wear protective gloves/ eye protection/ face protection. P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish. P303 + P361 + P353 : IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P403 + P235 : Store in a well-ventilated place. Keep cool. |
相關法規
運輸資料
| UN編號 | UN1993 |
| 類別 | 3 |
| 包裝類別 | II |
| HS編碼* | 2931.90-000 |
Application
Synthesis of Trifluoromethylketones from Weinreb Amides
Typical Procedure:
To a 50 mL round bottom flask equipped with a stir bar is added CsF (0.1512 g, 1.0 mmol, 0.2 eq.). Toluene (2.5 mL) is added to the flask, followed by 4-(tert-butyl)-N-methoxy-N-methylbenzamide (1.11 g, 5.0 mmol, 1 eq.). The flask is sealed with a septum equipped with an inlet needle as an exit valve. The flask is cooled to 0 °C for 10 minutes. Once cooled, TMSCF3 (1.42 g, 10.0 mmol, 2 eq.) is added to the reaction mixture dropwise over a period of ≈ 10 minutes. After completion of addition, the reaction mixture is allowed to stir at 0 °C for 10 minutes. The cooling bath is removed and the reaction mixture is allowed to stir at room temperature overnight. (Upon reaching room temperature, the reaction occurs and is mildly exothermic and gas is evolved.) Reaction progress is monitored by 1H NMR.
Once complete conversion to the silylated intermediate is confirmed, water (5 mL) followed by TBAF (5 mL, 1 M in THF, 1 eq.) is added to the reaction flask. The flask is equipped with a reflux condenser, open to air. The contents are then heated to 50 °C, and allowed to stir at that temperature for 2 hours. Once cooled to room temperature, the reaction mixture is diluted with Et2O (≈ 30 mL), and transferred to a separatory funnel. The organic layer is washed with deionized water (3 × 30 mL), followed with a brine solution (1 × 30 mL). The organic layer is dried with Na2SO4 and the solvent is removed in vacuo by rotary evaporation to yield crude trifluoromethylketone. Further purification is accomplished by flash chromatography (hexane : EtOAc = 8 : 2) to produce the pure CF3 ketone as an orange solid (0.935 g, Y. 81%).
To a 50 mL round bottom flask equipped with a stir bar is added CsF (0.1512 g, 1.0 mmol, 0.2 eq.). Toluene (2.5 mL) is added to the flask, followed by 4-(tert-butyl)-N-methoxy-N-methylbenzamide (1.11 g, 5.0 mmol, 1 eq.). The flask is sealed with a septum equipped with an inlet needle as an exit valve. The flask is cooled to 0 °C for 10 minutes. Once cooled, TMSCF3 (1.42 g, 10.0 mmol, 2 eq.) is added to the reaction mixture dropwise over a period of ≈ 10 minutes. After completion of addition, the reaction mixture is allowed to stir at 0 °C for 10 minutes. The cooling bath is removed and the reaction mixture is allowed to stir at room temperature overnight. (Upon reaching room temperature, the reaction occurs and is mildly exothermic and gas is evolved.) Reaction progress is monitored by 1H NMR.
Once complete conversion to the silylated intermediate is confirmed, water (5 mL) followed by TBAF (5 mL, 1 M in THF, 1 eq.) is added to the reaction flask. The flask is equipped with a reflux condenser, open to air. The contents are then heated to 50 °C, and allowed to stir at that temperature for 2 hours. Once cooled to room temperature, the reaction mixture is diluted with Et2O (≈ 30 mL), and transferred to a separatory funnel. The organic layer is washed with deionized water (3 × 30 mL), followed with a brine solution (1 × 30 mL). The organic layer is dried with Na2SO4 and the solvent is removed in vacuo by rotary evaporation to yield crude trifluoromethylketone. Further purification is accomplished by flash chromatography (hexane : EtOAc = 8 : 2) to produce the pure CF3 ketone as an orange solid (0.935 g, Y. 81%).
References
Application
Nucleophilic Trifluoromethylation
Reference
Application
Difluorocarbene Precursor
Reference
- Synthesis of gem-difluorinated cyclopropanes and cyclopropenes: trifluoromethyltrimethylsilane as a difluorocarbene source
考研文獻
文章/手冊
產品文件 （部分產品的分析圖譜無法提供，敬請諒解。）
SDS
請選擇語言。
請求的SDS不可用。
如需更多幫助，請聯繫我們 。
產品規格
檢驗報告(CoA)及其他文檔
請輸入批號
輸入的批號不正確
示例 CoA
可下載CoA示例。注：該示例可能非最新批次的CoA。
目前沒有該產品的 CoA 示例。
分析圖譜
請輸入批號
輸入的批號不正確
很抱歉，您搜索的分析圖譜無法提供。