text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

请选择数量

CAS RN: 2564-83-2 | 產品號碼: T1560

2,2,6,6-Tetramethylpiperidine 1-Oxyl Free Radical


纯度/分析方法: >98.0%(GC)(T)
別名
  • TEMPO Free Radical
文件:
5G
NT$2,400
15   ≥100  聯繫我們
25G
NT$7,200
14   ≥100  聯繫我們

* 以上價格已含運費關稅等但一些需要海運以及乾冰運輸的產品除外,詳情請與 當地經銷商 洽詢。
* TCI會時常優化儲存條件,儲存溫度請以在線目錄為準,敬請留意。


產品號碼 T1560
純度/分析方法 >98.0%(GC)(T)
分子式 / 分子量 C__9H__1__8NO = 156.25 
外觀與形狀(20°C) Solid
儲存條件 Refrigerated (0-10°C)
儲存在惰性氣體下 Store under inert gas
應避免的情況 Air Sensitive,Heat Sensitive
CAS RN 2564-83-2
Reaxys-RN 1422418
PubChem Substance ID 87577318
Merck Index(14) 9140
MDL編號

MFCD00009599

產品規格
Appearance Orange to Brown powder to crystal
Purity(GC) min. 98.0 %
Purity(Iodometric Titration) min. 98.0 %
Solubility in Methanol almost transparency
性質
熔點 39 °C
flp 67 °C
溶解性(可溶於) Methanol
GHS
圖形表示 Pictogram
信號詞 Danger
危險性說明 H314 : Causes severe skin burns and eye damage.
防範說明 P501 : Dispose of contents/ container to an approved waste disposal plant.
P260 : Do not breathe dusts or mists.
P264 : Wash skin thoroughly after handling.
P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection.
P303 + P361 + P353 : IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P301 + P330 + P331 : IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 : Wash contaminated clothing before reuse.
P304 + P340 + P310 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.
P305 + P351 + P338 + P310 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
P405 : Store locked up.
相關法規
RTECS # TN8991900
運輸資料
UN編號 UN3263
類別 8
包裝類別 II
HS編碼* 2933.39-000
*此H.S.編碼用於日本出口報關, 不適用於您所在國家或地區的進口申報
Application
TCI Practical Example: TEMPO Oxidation Utilizing Iodobenzene Diacetate as a Reoxidant

TEMPO Oxidation Utilizing Iodobenzene Diacetate as a Reoxidant

Used Chemicals

Procedure

To a solution of 1-naphthalenemethanol (306 mg, 2.0 mmol) in dichloromethane (2 mL, 1.0 mol/L) was added TEMPO (31.2 mg, 0.20 mmol), PhI(OAc)2 (709mg, 2.2 mmol) and the mixture was stirred at room temperature for 4 hours. Dichloromethane (12.5 mL), saturated aqueous sodium thiosulfate solution (12.5 mL) was added and the mixture was stirred for 30 minutes. The organic layer was washed with saturated aqueous sodium bicarbonate solution (10 mL), brine (10 mL) and the organic layer was dried over sodium sulfate and filtered. The solvent was removed under reduced pressure and the residue was purified by column chromatography (ethyl acetate:hexane = 0:100 - 3:97 on silica gel) to give 1-naphthaldehyde as a yellow liquid (291 mg, 93%).

Experimenter’s Comments

The reaction mixture was monitored by TLC (ethyl acetate:hexane = 1:9, Rf = 0.50).

Analytical Data

1-Naphthaldehyde

1H NMR (400 MHz, CDCl3); δ 10.41 (s, 1H), 9.26 (d, J = 8.9 Hz, 1H), 8.11 (d, J = 8.4 Hz, 1H), 8.01 (d, J = 6.8 Hz, 1H), 7.93 (d, J = 8.9 Hz, 1H), 7.74-7.57 (m, 3H).

Lead Reference


Application
Nitroxyl-radical-catalyzed Oxidative Coupling of Amides with Silylated Nucleophiles

T1560

Typical Procedure:
To a solution of N-benzylbenzenesulfonamide (61.8 mg, 0.25 mmol), KBr (14.9 mg, 0.125 mmol), and Na2SO4 (71.0 mg, 0.50 mmol) in MeCN (1.5 mL) is added t-BuOCl (33.9 µL, 0.30 mmol) at room temperature, and the mixture is stirred at room temperature for 1 h. Then, TEMPO (7.8 mg, 0.050 mmol) is added and stirred at room temperature for 30 min. To the solution is added Na2CO3 (26.5 mg, 0.25 mmol), and the mixture is stirred at room temperature for 20 h. Subsequently, TMSCN (93.8 mL, 0.75 mmol) and LiClO4 (2.7 mg, 0.025 mmol) are added to the reaction mixture, and further stirred at room temperature for 22 h. Saturated Na2SO3 aqueous solution (10 mL) is added to the mixture, and the product is extracted with AcOEt (15 mL×3). The organic phase is washed with brine and dried over Na2SO4. The organic phase is concentrated under reduced pressure, and the crude product is purified by column chromatography (hexane : AcOEt = 3 : 1) to give the desired product (67.4 mg, Y. 99%).

References


Application
Catalytic Oxidation

References


考研文獻


產品文件 (部分產品的分析圖譜無法提供,敬請諒解。)
SDS
請選擇語言。

請求的SDS不可用。

如需更多幫助,請聯繫我們

產品規格
檢驗報告(CoA)及其他文檔
請輸入批號 輸入的批號不正確

所搜尋批號的產品已停產,無相關文件。

示例 CoA
可下載CoA示例。注:該示例可能非最新批次的CoA。

目前沒有該產品的 CoA 示例。

分析圖譜
請輸入批號 輸入的批號不正確

很抱歉,您搜索的分析圖譜無法提供。

所搜尋批號的產品已停產,無相關文件。

其他文件

會話狀態
當前會話將在10分鐘後超時,並返回主頁。請點擊按鈕繼續瀏覽。分鐘後超時,並返回主頁。請點擊按鈕繼續瀏覽。

您的會話已超時,將返回至主頁。