Maximum quantity allowed is 999
CAS RN: 109-80-8 | 產品號碼: P0763
產品號碼 | P0763 |
純度/分析方法 ![]() |
>97.0%(GC)(T) |
分子式 / 分子量 | C__3H__8S__2 = 108.22 |
外觀與形狀(20°C) | Liquid |
儲存條件 ![]() |
Room Temperature (Recommended in a cool and dark place, <15°C) |
儲存在惰性氣體下 | Store under inert gas |
應避免的情況 | Air Sensitive |
CAS RN | 109-80-8 |
Reaxys-RN | 1071197 |
PubChem Substance ID | 87574906 |
SDBS (AIST Spectral DB) | 4220 |
Merck Index(14) | 7801 |
MDL編號 | MFCD00004904 |
Appearance | Colorless to Light yellow to Light orange clear liquid |
Purity(GC) | min. 97.0 % |
Purity(Iodometric Titration) | min. 97.0 % |
熔點 | -79 °C |
沸點 | 170 °C |
flp | 61 °C |
比重 | 1.08 |
折射率 | 1.54 |
水溶性 | Slightly soluble |
溶解性(可與之混溶) | Alcohol, Chloroform, Benzene, Ether |
圖形表示 |
![]() |
信號詞 | Warning |
危險性說明 | H302 : Harmful if swallowed. H315 : Causes skin irritation. H319 : Causes serious eye irritation. H227 : Combustible liquid. |
防範說明 | P501 : Dispose of contents/ container to an approved waste disposal plant. P270 : Do not eat, drink or smoke when using this product. P210 : Keep away from heat/sparks/open flames/hot surfaces. No smoking. P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ eye protection/ face protection. P302 + P352 : IF ON SKIN: Wash with plenty of water. P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish. P337 + P313 : If eye irritation persists: Get medical advice/ attention. P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P362 + P364 : Take off contaminated clothing and wash it before reuse. P332 + P313 : If skin irritation occurs: Get medical advice/ attention. P301 + P312 + P330 : IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. P403 + P235 : Store in a well-ventilated place. Keep cool. |
RTECS # | TZ2585500 |
HS編碼* | 2930.90-900 |
-
Used Chemicals
-
Procedure
-
Furfural (0.86 mL, 10 mmol) was dissolved in chloroform (10 mL) and cooled to 0 °C. 1,3-Propanedithiol (1.1 mL, 11 mmol) and TMSCl (0.3 mL, 2.0 mmol) were added and the reaction mixture was for 19 hours at room temperature. Ethyl acetate (30 mL) was added to the mixture and the organic layer was washed with brine (30 mL), dried over anhydrous sodium sulfate, and concentrated under reduced pressure. Purification of the crude product by silica gel chromatography (hexane:ethyl acetate = 5:1) afforded 2-(1,3-dithian-2-yl)furan (1, 1.37 g, 71% yield) as a yellow oil.
-
Experimenter’s Comments
-
Since 1,3-propanedithiol has a foul odor, weighing, reaction, and purification were performed in a draft chamber.
The instruments and effluents were treated with sodium hypochlorite solution after the reaction.
The reaction solution was monitored by UPLC.
-
Analytical Data
-
2-(1,3-dithian-2-yl)furan (1)
1H NMR (400 MHz, CDCl3); δ 7.32 (m, 1H), 6.40 (m, 1H), 6.26 (m, 1H), 5.09 (s, 1H), 2.96 (m, 4H), 2.18 (m, 1H), 2.05 (m, 1H).
-
Other Reference
-
- Stereocontrol with Lithium Trimethylzincate toward Gibberellin Synthesis