text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

请选择数量

CAS RN: 26456-05-3 | 產品號碼: M1787

10-Methylacridinium Perchlorate


纯度/分析方法: >98.0%(N)
別名
文件:
250MG
NT$2,000
0   5   聯繫我們
1G
NT$6,000
13   7   聯繫我們

* 以上價格已含運費關稅等但一些需要海運以及乾冰運輸的產品除外,詳情請與 當地經銷商 洽詢。
* TCI會時常優化儲存條件,儲存溫度請以在線目錄為準,敬請留意。


產品號碼 M1787
純度/分析方法 >98.0%(N)
分子式 / 分子量 C__1__4H__1__2ClNO__4 = 293.70 
外觀與形狀(20°C) Solid
儲存條件 Room Temperature (Recommended in a cool and dark place, <15°C)
包裝和容器 1G-Glass Bottle with Plastic Insert (閲覽圖片),  250MG-Glass Bottle with Plastic Insert (閲覽圖片)
CAS RN 26456-05-3
Reaxys-RN 3647072
PubChem Substance ID 87559032
產品規格
Appearance Light yellow to Amber to Dark green powder to crystal
Purity(with Total Nitrogen) min. 98.0 %
性質
熔點 241 °C(dec.)
GHS
圖形表示 Pictogram Pictogram
信號詞 Warning
危險性說明 H315 : Causes skin irritation.
H319 : Causes serious eye irritation.
H272 : May intensify fire; oxidizer.
防範說明 P501 : Dispose of contents/ container to an approved waste disposal plant.
P220 : Keep/Store away from clothing/ combustible materials.
P210 : Keep away from heat.
P221 : Take any precaution to avoid mixing with combustibles.
P264 : Wash skin thoroughly after handling.
P280 : Wear protective gloves/ eye protection/ face protection.
P302 + P352 : IF ON SKIN: Wash with plenty of water.
P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
P337 + P313 : If eye irritation persists: Get medical advice/ attention.
P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P362 + P364 : Take off contaminated clothing and wash it before reuse.
P332 + P313 : If skin irritation occurs: Get medical advice/ attention.
相關法規
運輸資料
UN編號 UN1479
類別 5.1
包裝類別 III
HS編碼* 2933.99-000
*此H.S.編碼用於日本出口報關, 不適用於您所在國家或地區的進口申報
Application
Baeyer–Villiger Oxidation with 10-Methylacridinium as an Organocatalyst

Typical Procedure:
Cyclobutanone (0.5 mmol) and 10-methylacridinium perchlorate (7.4 mg, 0.025 mmol) are dissolved in CH3CN (1 mL). Hydrogen peroxide (68 µL, 30% solution in water, 0.6 mmol) is added and the mixture is irradiated with a 450 W high-pressure mercury lamp in a Pyrex® flask (λ>320 nm) at room temperature for 20 h. The course of the reaction is monitored by TLC. After completion of the reaction, solvent is evaporated in vacuum. Purification of the residue by column chromatography (silica gel, ethyl acetate/petroleum ether gradient) yields the corresponding lactone.

References


考研文獻


產品文件 (部分產品的分析圖譜無法提供,敬請諒解。)
SDS
請選擇語言。

請求的SDS不可用。

如需更多幫助,請聯繫我們

產品規格
檢驗報告(CoA)及其他文檔
請輸入批號 輸入的批號不正確

所搜尋批號的產品已停產,無相關文件。

示例 CoA
可下載CoA示例。注:該示例可能非最新批次的CoA。

目前沒有該產品的 CoA 示例。

分析圖譜
請輸入批號 輸入的批號不正確

很抱歉,您搜索的分析圖譜無法提供。

所搜尋批號的產品已停產,無相關文件。

其他文件

會話狀態
當前會話將在10分鐘後超時,並返回主頁。請點擊按鈕繼續瀏覽。分鐘後超時,並返回主頁。請點擊按鈕繼續瀏覽。

您的會話已超時,將返回至主頁。