text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

请选择数量

CAS RN: 26386-88-9 | 產品號碼: D1672

Diphenylphosphoryl Azide


纯度/分析方法: >97.0%(GC)
別名
  • DPPA
文件:
5G
NT$880
≥40  17   下單後約2週內可以出貨
25G
NT$2,240
6   ≥100  聯繫我們
250G
NT$12,480
5   ≥40  聯繫我們

* 以上價格已含運費關稅等但一些需要海運以及乾冰運輸的產品除外,詳情請與 當地經銷商 洽詢。
* TCI會時常優化儲存條件,儲存溫度請以在線目錄為準,敬請留意。


產品號碼 D1672
純度/分析方法 >97.0%(GC)
分子式 / 分子量 C__1__2H__1__0N__3O__3P = 275.20 
外觀與形狀(20°C) Liquid
儲存條件 Refrigerated (0-10°C)
儲存在惰性氣體下 Store under inert gas
應避免的情況 Moisture Sensitive,Heat Sensitive
CAS RN 26386-88-9
Reaxys-RN 2058967
PubChem Substance ID 87568148
MDL編號

MFCD00001987

產品規格
Appearance Colorless to Almost colorless clear liquid
Purity(GC) min. 97.0 %
性質
比重 1.28
折射率 1.55
水溶性 Decomposes in contact with water, Insoluble
GHS
圖形表示 Pictogram
信號詞 Danger
危險性說明 H300 + H310 + H330 : Fatal if swallowed, in contact with skin or if inhaled.
H315 : Causes skin irritation.
H319 : Causes serious eye irritation.
防範說明 P501 : Dispose of contents/ container to an approved waste disposal plant.
P260 : Do not breathe dust/ fume/ gas/ mist/ vapors/ spray.
P270 : Do not eat, drink or smoke when using this product.
P262 : Do not get in eyes, on skin, or on clothing.
P271 : Use only outdoors or in a well-ventilated area.
P264 : Wash skin thoroughly after handling.
P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection.
P284 : Wear respiratory protection.
P337 + P313 : If eye irritation persists: Get medical advice/ attention.
P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P361 + P364 : Take off immediately all contaminated clothing and wash it before reuse.
P332 + P313 : If skin irritation occurs: Get medical advice/ attention.
P301 + P310 + P330 : IF SWALLOWED: Immediately call a POISON CENTER/doctor. Rinse mouth.
P302 + P352 + P310 : IF ON SKIN: Wash with plenty of water. Immediately call a POISON CENTER/doctor.
P304 + P340 + P310 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.
P403 + P233 : Store in a well-ventilated place. Keep container tightly closed.
P405 : Store locked up.
相關法規
運輸資料
UN編號 UN3278
類別 6.1
包裝類別 II
HS編碼* 2929.90-000
*此H.S.編碼用於日本出口報關, 不適用於您所在國家或地區的進口申報
Application
TCI Practical Example: Synthesis of a Carbamate Using DPPA

TCI反応実例:DPPAを用いるカルバメートの合成

Used Chemicals

Procedure

To a solution of thiazole-4-carboxylic acid (500 mg, 3.87 mmmol) and triethylamine (0.59 mL, 4.26 mmol, 1.1 equiv) in tert-butyl alcohol (2 mL) was added DPPA (0.92 mL, 4.26 mmol, 1.1 equiv) at 0 °C and stirred 30 min. Then, the reaction mixture was heated to 90 °C and stirred for 21 hours. After cooling to room temperature, the reaction mixture was removed under reduced pressure. The resulting residue was purified by column chromatography (ethyl acetate:hexane = 0:1 - 1:1 on silica gel) to give tert-butyl N-thiazol-4-ylcarbamate as a white solid (591 mg,y. 76%).

Experimenter’s Comments

The reaction mixture was monitored by LC.
TLC of the product: Rf = 0.4 (ethyl acetate:hexane = 1:4).

Analytical Data

tert-butyl N-thiazol-4-ylcarbamate

1H NMR (270 MHz, CDCl3); δ 8.58 (d, J = 2.2 Hz, 1H), 8.06 (brs, 1H), 7.29 (brs, 1H), 1.51 (s, 9H).

Lead Reference


Application
Phosphoryl Azide for Nosylation via Azidation

Reference


Application
Phosphoryl Azide for Azidations

Reference


Application
Condensing Agent

Experimental procedure2): To an ice-cooled mixture containing 1 (2.5 mmol) and 2 (2.5 mmol) in dry DMF (15 mL), DPPA (3.0 mmol) is slowly added, followed by drop-wise addition of Et3N (6.3 mmol). The reaction mixture is kept at 0 °C for another 2 h, and then allowed to warm up to room temperature. After 24 h, the reaction mixture is diluted with EtOAc (80 mL) and washed with an aqueous solution of citric acid (10%, 50 mL), H2O (50 mL), saturated aqueous NaHCO3 (50 mL), H2O (50 mL), and brine (50 mL). The organic phase is dried over Na2SO4, filtered and evaporated under reduced pressure. The resulting residue is purified by column chromatography to afford 3 (83% yield).

References


Application
DPPA: A Stable and Easy-to-handle Azidating Agent

Experimental procedure2): Diphenylphosphoryl azide (0.87 mL, 4.04 mmol) is added to a solution of alcohol 1 (98 mg, 0.40 mmol), PPh3 (211 mg, 0.81 mmol) and DEAD (0.37 mL, 40% in toluene, 0.81 mmol) in THF (5 mL) and the reaction is stirred at room temperature for 24 h. Concentration in vacuo and purification by column chromatography (Et2O:hexanes = 1:9) gave 2 (108 mg, 0.40 mmol, 99%) as a colorless oil.

References


考研文獻


TCIMail
產品文件 (部分產品的分析圖譜無法提供,敬請諒解。)
SDS
請選擇語言。

請求的SDS不可用。

如需更多幫助,請聯繫我們

產品規格
檢驗報告(CoA)及其他文檔
請輸入批號 輸入的批號不正確

所搜尋批號的產品已停產,無相關文件。

示例 CoA
可下載CoA示例。注:該示例可能非最新批次的CoA。

目前沒有該產品的 CoA 示例。

分析圖譜
請輸入批號 輸入的批號不正確

很抱歉,您搜索的分析圖譜無法提供。

所搜尋批號的產品已停產,無相關文件。

其他文件

會話狀態
當前會話將在10分鐘後超時,並返回主頁。請點擊按鈕繼續瀏覽。分鐘後超時,並返回主頁。請點擊按鈕繼續瀏覽。

您的會話已超時,將返回至主頁。