Maximum quantity allowed is 999
请选择数量
CAS RN: 530-62-1 | 產品號碼: C0119
1,1'-Carbonyldiimidazole [Coupling Agent for Peptides Synthesis]
×
![]()
×
![1,1'-Carbonyldiimidazole [Coupling Agent for Peptides Synthesis]](/_ui/responsive/theme-tci/images/missing_product_zoom.jpg "1,1'-Carbonyldiimidazole [Coupling Agent for Peptides Synthesis]")
* 以上價格已含運費關稅等但一些需要海運以及乾冰運輸的產品除外,詳情請與
當地經銷商
洽詢。
* TCI會時常優化儲存條件,儲存溫度請以在線目錄為準，敬請留意。
| 產品號碼 | C0119 |
| 純度/分析方法 | >97.0%(T) |
| 分子式 / 分子量 | C__7H__6N__4O = 162.15 |
| 外觀與形狀（20°C） | Solid |
| 儲存條件 | Refrigerated (0-10°C) |
| 儲存在惰性氣體下 | Store under inert gas |
| 應避免的情況 | Moisture Sensitive,Heat Sensitive |
| CAS RN | 530-62-1 |
| Reaxys-RN | 6826 |
| PubChem Substance ID | 87565300 |
| SDBS (AIST Spectral DB) | 21181 |
| Merck Index(14) | 1819 |
| MDL編號 | MFCD00005286 |
產品規格
| Appearance | White to Light yellow powder to crystal |
| Purity(Neutralization titration) | min. 97.0 % |
| Melting point | 115.0 to 122.0 °C |
性質
| 熔點 | 118 °C |
GHS
| 圖形表示 |
|
| 信號詞 | Danger |
| 危險性說明 | H302 : Harmful if swallowed. H314 : Causes severe skin burns and eye damage. |
| 防範說明 | P501 : Dispose of contents/ container to an approved waste disposal plant. P260 : Do not breathe dusts or mists. P270 : Do not eat, drink or smoke when using this product. P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection. P303 + P361 + P353 : IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P301 + P330 + P331 : IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P363 : Wash contaminated clothing before reuse. P301 + P312 + P330 : IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. P304 + P340 + P310 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. P305 + P351 + P338 + P310 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. P405 : Store locked up. |
相關法規
運輸資料
| UN編號 | UN1759 |
| 類別 | 8 |
| 包裝類別 | III |
| HS編碼* | 2933.29-000 |
Application
TCI Practical Example: Condensation using 1,1'-Carbonyldiimidazole
Used Chemicals
- N-Carbobenzoxyglycine [C0575]
- 1,1'-Carbonyldiimidazole [C0119]
- Anhydrous tetrahydrofuran
- L-Tyrosine ethyl ester [T0551]
Procedure
To a solution of N-carbobenzoxyglycine (2.10 g, 10 mmol) in anhydrous tetrahydrofuran (10 mL) was added 1,1'-carbonyldiimidazole (1.64 g, 10 mmol). The mixture was stirred at room temperature for 4 hours. L-tyrosine ethyl ester (2.10 g, 10 mmol) was added to the reaction mixture. The mixture was stirred at room temperature overnight. The solvent was removed under reduced pressure. The residue was dissolved in ethyl acetate (30 mL), treated with 1 mol/L HCl solution (50 mL), and stirred for 10 min. The organic layer was separated and the aqueous layer was extracted with ethyl acetate (20 mL x 2). The combined organic layers were washed with saturated aqueous NaHCO3 solution (30 mL), washed with brine (30 mL), dried over Na2SO4 and filtered. The solvent was removed under reduced pressure. The residue was purified by flash column chromatography (eluent: dichloromethane/ethyl acetate, 90/10→75/25→50/50) to obtain 1 as a white solid (3.54 g, 88%).
Experimenter's Comments
The reaction mixture was monitored by TLC (hexane/ethyl acetate = 5/1, Rf = 0.17) and 1H NMR. After the reaction mixture was concentrated and quenched by 1 mol/L HCl solution, the recrystallization with ethanol was conducted. Sticky white solid was precipitated at low temperature but it can't be filtered.
Analytical Data（Compound 1）
1H NMR (400 MHz, CDCl3); δ 7.35 (m, 5H), 6.92 (d, J =8.24 Hz, 2H), 6.67(dd, 3J =8.24 Hz, 4J =1.83 Hz, 2H), 6.45(d, J =6.87 Hz, 1H), 5.69 (s, 1H), 5.40 (br s, 1H), 5.12 (s, 2H), 4.81(q, J =5.95 Hz, 1H), 4.18 (q, J =7.32 Hz, 2H), 3.84 (m, 2H), 3.03 (m, 2H), 1.27 (t, J=7.32 Hz, 4H)
13C NMR (101 MHz, CDCl3); δ 171.55, 168.74, 156.61, 155.24, 135.99, 130.50, 130.39, 128.57, 128.29, 128.14, 126.93, 115.52, 115.37, 67.30, 61.78, 61.50, 53.16, 44.31, 36.95, 14.17, 14.07.
Lead Reference
- N,N'-Carbonyldiimidazole, a New Peptide Forming Reagent
Application
Condensation of Amino Acides Using 1,1’- Carbonyldiimidazole
Typical Procedure:
To a solution of N-Cbz-glycine (2.09 g, 0.010 mol) in dry THF (10 mL) is added 1,1’-carbonyldiimidazole (CDI) (1.62 g, 0.010 mol). After stirring for 1.5 hour, L-tyrosine ethyl ester (2.09 g, 0.010 mol) is added to the solution and the reaction mixture is stirred overnight. Then THF is removed by an evaporator and 1 N-HCl (50 mL) is added. Cooling of the solution gives a solid. This is washed with water and 5% NaHCO3. The solid is filtered and washed with water again. After drying, the product is recrystallized from 50% ethanol to give ethyl N-Cbz-glycine- L -tyrosine ethyl ester (3.79 g, yield 95%).
To a solution of N-Cbz-glycine (2.09 g, 0.010 mol) in dry THF (10 mL) is added 1,1’-carbonyldiimidazole (CDI) (1.62 g, 0.010 mol). After stirring for 1.5 hour, L-tyrosine ethyl ester (2.09 g, 0.010 mol) is added to the solution and the reaction mixture is stirred overnight. Then THF is removed by an evaporator and 1 N-HCl (50 mL) is added. Cooling of the solution gives a solid. This is washed with water and 5% NaHCO3. The solid is filtered and washed with water again. After drying, the product is recrystallized from 50% ethanol to give ethyl N-Cbz-glycine- L -tyrosine ethyl ester (3.79 g, yield 95%).
References
考研文獻
產品文件 （部分產品的分析圖譜無法提供，敬請諒解。）
SDS
請選擇語言。
請求的SDS不可用。
如需更多幫助，請聯繫我們 。
產品規格
檢驗報告(CoA)及其他文檔
請輸入批號
輸入的批號不正確
示例 CoA
可下載CoA示例。注：該示例可能非最新批次的CoA。
目前沒有該產品的 CoA 示例。
分析圖譜
請輸入批號
輸入的批號不正確
很抱歉，您搜索的分析圖譜無法提供。