Maximum quantity allowed is 999
请选择数量
CAS RN: 17564-64-6 | 产品编码: A5504
N-Chloromethylphthalimide [for HPLC Labeling]
规格 | 单价 | 同一天 | 2-3个工作日 | 数量 |
---|---|---|---|---|
5G |
S$189.00
|
8 | 1 |
|
技术规格
Appearance | White to Almost white powder to crystal |
Purity(HPLC) | min. 98.0 area% |
Purity(Argentometric Titration) | min. 98.0 % |
Melting point | 133.0 to 137.0 °C |
Solubility in hot Methanol | almost transparency |
Effect test of HPLC derivatization | Effective as labeling agent for Hexanoic Acid , Decanoic Acid , Dodecanoic Acid |
物性(参考值)
熔点 | 135 °C |
GHS
象形图 | |
信号词 | Warning |
危险性说明 | H315 : Causes skin irritation. H319 : Causes serious eye irritation. |
防范说明 | P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ eye protection/ face protection. P302 + P352 : IF ON SKIN: Wash with plenty of water. P337 + P313 : If eye irritation persists: Get medical advice/ attention. P305 + P351 + P338 : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P362 + P364 : Take off contaminated clothing and wash it before reuse. P332 + P313 : If skin irritation occurs: Get medical advice/ attention. |
相关法规
运输信息
HS编码* | 2925.19-000 |
应用
HPLC Labeling Reagent for Carboxylic Acids
The compound 1 is an HPLC labeling reagent, which has a chloromethyl group and easily reacts with a carboxyl group to form an ester in the presence of a base. The resultant ester is stable and can reach the detector without any decomposition under reversed phase HPLC. An excellent chromatogram can be obtained by measuring at 254 nm, an absorption wavelength that is generally used for UV detection.
Application examples:
[Fatty acids] 1)
Dissolve 3 mg of a sample in 1 mL of acetonitrile, and add 1 mL of the labeling reagent 1 / acetonitrile solution (10 mg / mL) and 1 mL of triethylamine / acetonitrile solution (5 mg / mL). Close the cap of the reaction vessel and incubate the solution at 60 °C for 1 h. Cool the resultant solution to room temperature and use it as an HPLC sample. In the case of using alkali metal salts and crown ethers, the esterification reaction is completed in 5 min at 60 °C. Cool the resultant solution to room temperature and use it as an HPLC sample.
[Fatty acids] 1)
Dissolve 3 mg of a sample in 1 mL of acetonitrile, and add 1 mL of the labeling reagent 1 / acetonitrile solution (10 mg / mL) and 1 mL of triethylamine / acetonitrile solution (5 mg / mL). Close the cap of the reaction vessel and incubate the solution at 60 °C for 1 h. Cool the resultant solution to room temperature and use it as an HPLC sample. In the case of using alkali metal salts and crown ethers, the esterification reaction is completed in 5 min at 60 °C. Cool the resultant solution to room temperature and use it as an HPLC sample.
TCI Products Pamphlet
HPLC Labeling Reagents ( PDF 10MB )
HPLC Labeling Reagents ( PDF 10MB )
References
参考文献
文章/手册
TCIMail
产品文档 (部分产品的分析图谱无法提供,敬请谅解。)
化学品安全说明书(SDS)
请选择语言。
如需更多帮助,请联系我 们。
技术规格
CoA及其他文档
请输入批号
批号输入有误。请输入中横线前的4-5个字母数字字符。
示例 CoA
可下载CoA示例。注:该示例不一定是最新批次的CoA。
目前没有该产品的 CoA 示例。
分析图谱
请输入批号
批号输入有误。请输入中横线前的4-5个字母数字字符。
很抱歉,您搜索的分析图谱无法提供。