Maximum quantity allowed is 999
CAS RN: 1295-35-8 | Product Number: B6553
Bis(1,5-cyclooctadiene)nickel(0)
Purity: >95.0%(T)
- Ni(COD)2
Size | Unit Price | Same Day | 2-3 Business Days | Quantity |
---|---|---|---|---|
5G |
S$388.50
|
Contact Us | 6 |
|
* Please contact our distributors or
TCI
to order TCI products.
* The storage conditions are subject to change without notice.
Supplemental Product Information:
[Handling Notes]
This product may be partially colored due to air-sensitivity. If the product is partially colored, we confirmed that it is not problematic for usage as a catalyst. It is recommended to use all of the product as soon as possible upon opening the ampule bottle.
Product Number | B6553 |
Purity / Analysis Method | >95.0%(T) |
Molecular Formula / Molecular Weight | C__1__6H__2__4Ni = 275.06 |
Physical State (20 deg.C) | Solid |
Storage Temperature | Frozen (-20°C) |
Store Under Inert Gas | Store under inert gas |
Condition to Avoid | Light Sensitive,Air Sensitive,Heat Sensitive |
CAS RN | 1295-35-8 |
Reaxys Registry Number | 11341079 |
MDL Number | MFCD00058902 |
Appearance | Light yellow to Yellow Green to Brown powder to crystal |
Purity(Chelometric Titration) | min. 95.0 % |
Catalyst test | to pass test |
NMR | confirm to structure |
Pictogram | |
Signal Word | Danger |
Hazard Statements | H372 : Causes damage to organs through prolonged or repeated exposure. H317 : May cause an allergic skin reaction. H334 : May cause allergy or asthma symptoms or breathing difficulties if inhaled. H350 : May cause cancer. H228 : Flammable solid. |
Precautionary Statements | P501 : Dispose of contents/ container to an approved waste disposal plant. P272 : Contaminated work clothing should not be allowed out of the workplace. P260 : Do not breathe dust/ fume/ gas/ mist/ vapors/ spray. P270 : Do not eat, drink or smoke when using this product. P202 : Do not handle until all safety precautions have been read and understood. P240 : Ground and bond container and receiving equipment. P210 : Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P201 : Obtain special instructions before use. P241 : Use explosion-proof electrical/ ventilating/ lighting/ equipment. P264 : Wash skin thoroughly after handling. P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection. P284 : Wear respiratory protection. P302 + P352 : IF ON SKIN: Wash with plenty of water. P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish. P308 + P313 : IF exposed or concerned: Get medical advice/ attention. P362 + P364 : Take off contaminated clothing and wash it before reuse. P304 + P340 : IF INHALED: Remove person to fresh air and keep comfortable for breathing. P333 + P313 : If skin irritation or rash occurs: Get medical advice/ attention. P405 : Store locked up. |
RTECS# | QR6135000 |
UN Number | UN1325 |
Class | 4.1 |
Packing Group | II |
H.S.code* | 2931.90-000 |
-
Used Chemicals
-
Procedure
-
Phenylboronic acid (366 mg, 3.0 mmol, 1.5 eq.), triphenylphosphine (42 mg, 0.16 mmol, 0.08 eq.), tripotassium phosphate (1.27 g, 6.0 mmol, 3.0 eq.) and Ni(cod)2 (22 mg, 0.08 mmol, 0.04 eq.) were weighed and sealed in a glove box. To this mixture, 4’-chloroacetophenone (0.26 mL, 2.0 mmol) in THF (8 mL) was added and the reaction mixture was stirred for 24 hours at r.t., and then quenched with water (15 mL). The solution was extracted with ethyl acetate (15 mL x 3) and the combined organic layer was washed with brine (15 mL), dried over sodium sulfate and filtered. The solvent was removed under reduced pressure and the residue was purified by column chromatography (on silica gel, ethyl acetate:hexane = 1:10) to give 4-acetylbiphenyl as a white solid (360 mg, 92% yield).
-
Experimenter’s Comments
-
The reaction mixture was monitored by GC.
Commercially available dry THF was used.
The functionality of the partially discolored Ni(cod)2 was verified, and it was confirmed through this experiment that the reaction proceeded without any problems.
-
Analytical Data
-
4-Acetylbiphenyl
1H NMR (400 MHz, CDCl3); δ 8.04 (d, J = 8.0 Hz, 2H), 7.69 (d, J = 8.0 Hz, 2H), 7.63 (d, J = 7.2 Hz, 2H), 7.50-7.46 (m, 2H), 7.42-7.39 (m, 1H), 2.65 (s, 3H).
-
Lead Reference
-
- Triphenylphosphine as a Ligand for Room-Temperature Ni(0)-Catalyzed Cross-Coupling Reactions of Aryl Chlorides with Arylboronic Acids
Articles/Brochures
Safety Data Sheet (SDS)
The requested SDS is not available.
Please Contact Us for more information.
Specifications
C of A & Other Certificates
Sample C of A
A sample C of A for this product is not available at this time.
Analytical Charts
The requested analytical chart is not available. Sorry for the inconvenience.