text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

Please select the quantity

CAS RN: 1295-35-8 | Product Number: B6553

Bis(1,5-cyclooctadiene)nickel(0)


Purity: >95.0%(T)
Synonyms:
  • Ni(COD)2
Product Documents:
5G
$259.00
7   12  

* Please contact our distributors or TCI to order our products. The above prices do not include freight cost, customs, and other charges to the destination.
* The storage conditions are subject to change without notice.


Supplemental Product Information:

[Handling Notes]
This product may be partially colored due to air-sensitivity. If the product is partially colored, we confirmed that it is not problematic for usage as a catalyst. It is recommended to use all of the product as soon as possible upon opening the ampule bottle.

Product Number B6553
Purity / Analysis Method >95.0%(T)
Molecular Formula / Molecular Weight C__1__6H__2__4Ni = 275.06 
Physical State (20 deg.C) Solid
Storage Temperature Frozen (-20°C)
Store Under Inert Gas Store under inert gas
Condition to Avoid Light Sensitive,Air Sensitive,Heat Sensitive
CAS RN 1295-35-8
Reaxys Registry Number 11341079
MDL Number

MFCD00058902

Specifications
Appearance Light yellow to Yellow Green to Brown powder to crystal
Purity(Chelometric Titration) min. 95.0 %
Catalyst test to pass test
NMR confirm to structure
Properties (reference)
GHS
Pictogram Pictogram Pictogram
Signal Word Danger
Hazard Statements H372 : Causes damage to organs through prolonged or repeated exposure.
H317 : May cause an allergic skin reaction.
H334 : May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H350 : May cause cancer.
H228 : Flammable solid.
Precautionary Statements P501 : Dispose of contents/ container to an approved waste disposal plant.
P272 : Contaminated work clothing should not be allowed out of the workplace.
P260 : Do not breathe dust/ fume/ gas/ mist/ vapors/ spray.
P270 : Do not eat, drink or smoke when using this product.
P202 : Do not handle until all safety precautions have been read and understood.
P240 : Ground and bond container and receiving equipment.
P210 : Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P201 : Obtain special instructions before use.
P241 : Use explosion-proof electrical/ ventilating/ lighting/ equipment.
P264 : Wash skin thoroughly after handling.
P280 : Wear protective gloves/ protective clothing/ eye protection/ face protection.
P284 : Wear respiratory protection.
P302 + P352 : IF ON SKIN: Wash with plenty of water.
P370 + P378 : In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
P308 + P313 : IF exposed or concerned: Get medical advice/ attention.
P362 + P364 : Take off contaminated clothing and wash it before reuse.
P304 + P340 : IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P333 + P313 : If skin irritation or rash occurs: Get medical advice/ attention.
P405 : Store locked up.
Related Laws:
RTECS# QR6135000
Transport Information:
UN Number UN1325
Class 4.1
Packing Group II
H.S.code* 2931.90-000
*This code is applied to the products when TCI exports from Japan and not for import in your country.
Application
TCI Practical Example: Suzuki-Miyaura Coupling Using Ni(cod)2

TCI Practical Example: Suzuki-Miyaura Coupling Using Ni(cod)2

Used Chemicals

Procedure

Phenylboronic acid (366 mg, 3.0 mmol, 1.5 eq.), triphenylphosphine (42 mg, 0.16 mmol, 0.08 eq.), tripotassium phosphate (1.27 g, 6.0 mmol, 3.0 eq.) and Ni(cod)2 (22 mg, 0.08 mmol, 0.04 eq.) were weighed and sealed in a glove box. To this mixture, 4’-chloroacetophenone (0.26 mL, 2.0 mmol) in THF (8 mL) was added and the reaction mixture was stirred for 24 hours at r.t., and then quenched with water (15 mL). The solution was extracted with ethyl acetate (15 mL x 3) and the combined organic layer was washed with brine (15 mL), dried over sodium sulfate and filtered. The solvent was removed under reduced pressure and the residue was purified by column chromatography (on silica gel, ethyl acetate:hexane = 1:10) to give 4-acetylbiphenyl as a white solid (360 mg, 92% yield).

Experimenter’s Comments

The reaction mixture was monitored by GC.
Commercially available dry THF was used.
The functionality of the partially discolored Ni(cod)2 was verified, and it was confirmed through this experiment that the reaction proceeded without any problems.

Analytical Data

4-Acetylbiphenyl

1H NMR (400 MHz, CDCl3); δ 8.04 (d, J = 8.0 Hz, 2H), 7.69 (d, J = 8.0 Hz, 2H), 7.63 (d, J = 7.2 Hz, 2H), 7.50-7.46 (m, 2H), 7.42-7.39 (m, 1H), 2.65 (s, 3H).

Lead Reference


Articles/Brochures

Product Documents (Note: Some products will not have analytical charts available.)
Safety Data Sheet (SDS)
Please select Language.

The requested SDS is not available.

Please Contact Us for more information.

Specifications
C of A & Other Certificates
Please enter Lot Number Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.

The product with the lot number searched for has been discontinued and no related documentation is available.

Sample C of A
This is a sample C of A and may not represent a recently manufactured lot of the product.

A sample C of A for this product is not available at this time.

Analytical Charts
Please enter Lot Number Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.

The requested analytical chart is not available. Sorry for the inconvenience.

The product with the lot number searched for has been discontinued and no related documentation is available.

Other Documents

Session Status
Your session will timeout in 10 minutes. You will be redirected to the HOME page after session timeout. Please click the button to continue session from the same page. minute. You will be redirected to the HOME page after session timeout. Please click the button to continue session from the same page.

Your session has timed out. You will be redirected to the HOME page.