text.skipToContent text.skipToNavigation

Maximum quantity allowed is 999

Please select the quantity

CAS RN: 124522-09-4 | Product Number: A5553

3-Bromomethyl-7-methoxy-1,4-benzoxazin-2-one [for HPLC Labeling]


Purity: >98.0%(T)
Synonyms:
Product Documents:
100MG
54,00 €
1   3  
1G
343,00 €
2   11  

*Stock available in Belgium will be delivered in 1 to 3 days
*Stock available in Japan will be delivered in 1 to 2 weeks (excludes regulated items and dry ice shipments).


Product Number A5553
Purity / Analysis Method >98.0%(T)
Molecular Formula / Molecular Weight C__1__0H__8BrNO__3 = 270.08 
Physical State (20 deg.C) Solid
Storage Temperature Refrigerated (0-10°C)
Condition to Avoid Light Sensitive,Heat Sensitive
CAS RN 124522-09-4
PubChem Substance ID 87563171
MDL Number

MFCD00143099

Specifications
Appearance Light yellow to Brown powder to crystal
Purity(HPLC) min. 97.0 area%
Purity(Argentometric Titration) min. 98.0 %
Effect test of HPLC derivatization Effective as labeling agent for Linoleic Acid , Oleic Acid
Properties (reference)
GHS
Pictogram Pictogram
Signal Word Warning
Hazard Statements H315 : Causes skin irritation.
H319 : Causes serious eye irritation.
Precautionary Statements P264 : Wash skin thoroughly after handling.
P280 : Wear protective gloves/ eye protection/ face protection.
P302 + P352 : IF ON SKIN: Wash with plenty of water.
P337 + P313 : If eye irritation persists: Get medical advice/ attention.
P362 + P364 : Take off contaminated clothing and wash it before reuse.
P332 + P313 : If skin irritation occurs: Get medical advice/ attention.
Related Laws:
Transport Information:
HS Number 2934999090
Application
HPLC Labeling Reagent for Carboxylic Acids

The compound 1 is an HPLC fluorescence labeling reagent, which has a bromomethyl group, can easily react with a carboxyl group to form the corresponding ester in the presence of a base. The resultant ester is stable enough to reach the detector without any decomposition under reversed phase HPLC. An excellent chromatogram can be obtained by fluorescence detection at the excitation and emission wavelengths of 355 nm and 430 nm, respectively.

Application examples:
[Fatty acids] 1)
A solution of the labeling reagent 1 (0.1 mL, 1.0 mM acetonitrile solution) is added to a solution of a fatty acid (0.5 mL, 0.2~10 nmol in acetonitrile). To this solution, a saturated K2CO3 / acetonitrile solution (0.5 mL) containing 18-crown 6-ether (5.7 mM) is added, and incubate at 40 °C for 30 min. After cooling to room temperature, use it as the HPLC sample solution.

References


PubMed Literature


Articles/Brochures

TCIMAIL
Product Documents (Note: Some products will not have analytical charts available.)
Safety Data Sheet (SDS)
Please select Language.

The requested SDS is not available.

Please Contact Us for more information.

Specifications
C of A & Other Certificates
Please enter Lot Number Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.

The product with the lot number searched for has been discontinued and no related documentation is available.

Sample C of A
This is a sample C of A and may not represent a recently manufactured lot of the product.

A sample C of A for this product is not available at this time.

Analytical Charts
Please enter Lot Number Incorrect Lot Number. Please input only the 4-5 alphanumeric characters before the hyphen.

The requested analytical chart is not available. Sorry for the inconvenience.

The product with the lot number searched for has been discontinued and no related documentation is available.

Other Documents

Session Status
Your session will timeout in 10 minutes. You will be redirected to the HOME page after session timeout. Please click the button to continue session from the same page. minute. You will be redirected to the HOME page after session timeout. Please click the button to continue session from the same page.

Your session has timed out. You will be redirected to the HOME page.