Maximum quantity allowed is 999
CAS RN: 1335047-34-1 | 产品编码: B6254
(4,4'-Di-tert-butyl-2,2'-bipyridine-κ2N1,N1')[bis[3,5-difluoro-2-(5-methyl-2-pyridinyl-κN)phenyl-κC1]]iridium Hexafluorophosphate
纯度/分析方法: >90.0%(HPLC)
- (4,4'-二叔丁基-2,2'-联吡啶-κ2N1,N1')[双[3,5-二氟-2-(5-甲基-2-吡啶基-κN)苯基-κC1]]铱六氟磷酸盐
- (4,4'-二-叔丁基-2,2'-联吡啶)双[2-(2',4'-二氟苯基)-5-甲基吡啶]铱(III)六氟磷酸盐
- (4,4'-Di-tert-butyl-2,2'-bipyridine)bis[2-(2',4'-difluorophenyl)-5-methylpyridine]iridium(III) Hexafluorophosphate
- [Ir(dF(Me)ppy)2(dtbbpy)]PF6
* 无具体发货日期的情况,如:显示“8个工作日后发货”,将在您订购日起的8个工作日后发货。
* 我们将以最优方式从上海/天津两大仓库发货。国内库存不足,需两周左右向日本总部调货。
* 对于可分装产品,11:30前的订单,当天发货;11:30后的订单,隔天发货。
* 如需大包装,请点击“大包装询价”按钮(对于某些产品我们无法提供大包装)。
* TCI会经常复审储藏条件以对其进行优化,请以在线目录为准,敬请留意。
* 更多信息,请联系营业部:021-67121386 / Sales-CN@TCIchemicals.com 。任何货期、规格或包装方面的需求,请联系我们 。
产品编码 | B6254 |
纯度/分析方法 | >90.0%(HPLC) |
分子式/分子量 | C__4__2H__4__0F__1__0IrN__4P = 1,013.98 |
外观与形状(20°C) | 固体 |
储存温度 | 室温 (15°C以下阴凉干燥处) |
储存在惰性气体下 | 存放于惰性气体之中 |
应避免的情况 | 光,空气 |
包装和容器 | 1G-带有塑料内管的玻璃瓶 (查看图片), 200MG-带有塑料内管的玻璃瓶 (查看图片) |
CAS RN | 1335047-34-1 |
PubChem物质ID | 468591000 |
MDL编号 | MFCD31619196 |
Appearance | Light yellow to Yellow powder to crystal |
Purity(HPLC) | min. 90.0 area% |
NMR | confirm to structure |
熔点 | 360 °C |
象形图 | |
信号词 | 警告 |
危险性说明 | H315 : 造成皮肤刺激。 H319 : 造成严重眼刺激。 |
防范说明 | P264 : 作业后彻底清洗皮肤。 P280 : 戴防护手套/戴防护眼罩/戴防护面具。 P302 + P352 : 如皮肤沾染:用水充分清洗。 P337 + P313 : 如仍觉眼刺激:求医/就诊。 P305 + P351 + P338 : 如进入眼睛:用水小心冲洗几分钟。如戴隐形眼镜并可方便地取出,取出隐形眼镜。继续冲洗。 P362+P364 : 脱掉沾污的衣服,清洗后方可重新使用。 P332 + P313 : 如发生皮肤刺激:求医/就诊。 |
新化学物质备案回执号 | B1A232216191 |
监管条件代码(*) |
-
Used Chemicals
-
- Piperidine
- 4-Methoxystyrene [M0130]
- (4,4'-Di-tert-butyl-2,2'-bipyridine)bis[2-(2',4'-difluorophenyl)-5-methylpyridine]iridium(III) Hexafluorophosphate (= Ir[dF(Me)(ppy)2(dtbbpy)]PF6) [B6254]
- Toluene
- 2,4,6-Triisopropylbenzenethiol
-
Procedure
-
2,4,6-Triisopropylbenzenethiol (0.060 g, 0.25 mmol, 0.5 eq), piperidine (0.050 mL, 0.50 mmol, 1.0 eq), 4-methoxystyrene (0.10 mL, 0.75mmol, 1.5 eq), Ir[dF(Me)(ppy)2(dtbbpy)]PF6 (10 mg, 0.0099 mmol, 2.0 mol%) were dissolved in toluene (10 mL) at rt under N2. The mixture was placed at a distance of 2-3 cm from Blue LED lamp with a cooling fan. The yellow orange suspension was stirred at rt under visible light irradiation until the amine was completely consumed. After 12 h of irradiation, the reaction mixture was diluted with ethyl acetate (20 mL) and extracted with 1 mol/L HCl aq. (70 mL x 2). The combined aqueous layer was washed with diethyl ether (30 mL x 2), then neutralized with 2 mol/L NaOH aq. (78 mL) to pH 7 and then saturated sodium bicarbonate aq. (10 mL) was added to ensure slightly basic conditions. The aqueous layer was extracted with dichloromethane (50 mL x 3). The combined organic layer was dried over sodium sulfate (30 g) for about 30 minutes and then filtered. The solvent was removed in vacuo to give compound 1 as a colorless oil (39 mg, y. 35%).
-
Experimenter’s Comments
-
Toluene was degassed with nitrogen for 30 minutes before use.
Irradiation of visible light was performed with Kessil A160WE Tuna Blue 40Wx2.
The reaction mixture was maintained at rt by a cooling fan.
The reaction mixture was monitored by 1H NMR and GC.
-
Analytical Data
-
Compound 1
1H NMR (400 MHz, CDCl3); δ 7.12 (d, J = 7.8 Hz, 2H), 6.82 (d, J = 7.8 Hz, 2H), 3.78 (s, 3H), 2.79–2.75 (m, 2H), 2.56–2.49 (m, 6H), 1.46 (m, 4H), 1.25 (bs, 2H).
13C NMR (101 MHz, CDCl3); δ 157.82, 132.58, 129.57, 113.75, 61.64, 55.22, 54.51, 32.62, 25.90, 24.37.
-
Lead Reference
-
- Catalytic intermolecular hydroaminations of unactivated olefins with secondary alkyl amines
-
Other References
-
- Anti-Markovnikov Hydroamination of Unactivated Alkenes with Primary Alkyl Amines
化学品安全说明书(SDS)
如需更多帮助,请联系我 们。
技术规格
CoA及其他文档
示例 CoA
目前没有该产品的 CoA 示例。
分析图谱
很抱歉,您搜索的分析图谱无法提供。